+1 866 300 9012   contact@measur.ca
SHOPPING CART

No Products in the Cart

TOTAL:
$0.00
DJI Inspire 3
DJI Inspire 3
DJI Inspire 3

    DJI Inspire 3

    $0.00

    The All-In-One 8k Camera Drone for Aerial Cinematography

    The DJI Inspire 3 sets a new standard for cinematography with its unparalleled performance. Equipped with a 1/1.8-inch sensor night vision FPV Camera and a 161-degree ultra-wide FOV, this drone delivers stunning 1090p/60fps video feed, even in low light conditions. Its max horizontal speed of 94KPH allows you to capture unique and dynamic shots.

    The Inspire 3 features dual TB51 Intelligent Batteries, providing an industry-leading flight time of 28 minutes and rapid battery charging time of 90% in just 35 minutes for two batteries. Its customizable obstacle avoidance system allows you to choose the direction and set range independently, while its high-precision RTK positioning delivers centimeter-level accuracy.

    With an omnidirectional sensing system that enhances flight accuracy and safety, and an O3 Pro transmission system that supports 1080p/60fps live feeds and ultra-low latency of 90 ms within a 15km max range, the Inspire 3 is a versatile and reliable choice for professional filmmakers.


    8m/s

    Ascend/Descend Speed

    28 min

    Flight time

    1920×1080@60fps

    FPV Camera Resolution

    1 cm + 1 PPM 

    Horizontal RTK Fix


     

     

    High-Mobility Precision Flight System

    Inspire 3 uses an all-new design that supports 360° Pan and Tilt Boost structures. When the landing gear is lowered, the gimbal supports obstruction-free 80° upward-angle shooting, enabling cinematographers to capture strikingly innovative shots.



     Centimeter-Level RTK Positioning

    The DJI Inspire 3 drone incorporates advanced RTK positioning technology that is commonly used in industries such as architecture and surveying to provide highly precise measurements at the centimeter level. This technology surpasses the traditional meter-level positioning offered by Global Navigation Satellite Systems (GNSS), resulting in more stable flight and increased accuracy in flight-route planning. The drone's airframe features RTK antennas with a new stacked ceramic design, which allows for three types of GNSS (GPS, BeiDou, and Galileo) and dual-frequency positioning with centimeter-level accuracy.

    Users can achieve this level of precision by either activating an RTK network or using a D-RTK 2 Mobile Station, without the need for any additional modules. The utilization of RTK technology significantly improves creative efficiency.



    Waypoint Pro

    Waypoint Pro is a specialized tool created specifically for aerial cinematography. It allows for the planning of flight-routes and shots with various personalized options. The newly introduced Repeatable Routes and 3D Dolly modes make it possible to achieve an automated shooting experience that is innovative and simple to use. Furthermore, RTK technology ensures highly precise flight-route planning and execution. Waypoint Pro can be utilized by both solo shooters and professional crews to master even the most intricate of scenes.



    Repeatable Routes

    By utilizing Repeatable Routes, the aircraft will fly on the same path automatically while keeping all the pre-set parameters, such as altitude, speed, gimbal angle, and camera settings. With this feature, cinematographers can easily perform challenging one-take shots or fly at various times in the same location to create long-duration timelapses that showcase transitions such as day to night or changes in seasons. This makes the process effortless and seamless.



    3D Dolly

    3D Dolly can simulate a crane, cablecam, or dolly on film sets while going far beyond the limitations of those devices.



    Spotlight Pro

    Spotlight Pro further enables solo creators with more shot possibilities. Based on powerful machine-learning algorithms, Inspire 3 supports automated subject recognition and locking for people, vehicles, and boats with greater accuracy than its predecessor.



    Omnidirectional Sensing System


    The Inspire 3 is equipped with nine sensors that create a robust omnidirectional sensing system capable of detecting obstacles in all directions, providing complete protection during flight. Notably, a fisheye camera has been included in each of the four landing arms, marking the first time this design has been implemented. This design ensures the avoidance of obstruction from the airframe when the landing gear is raised, and enables horizontal obstacle sensing when the landing gear is lowered.

    DJI Inspire 3



    Full-frame Three-axis Gimbal Camera, X9-8K Air

     

    Internal Recording of ProRes RAW up to

    8K/75fps

    Internal Recording of CinemaDNG up to

    8K/25fps



    DL Mount Lenses

    The X9-8K Air is compatible with DJI's exclusive DL mount, which allows it to use a new telephoto lens (to be released in the future) and an additional 18 mm F2.8 full-frame ultra-wide lens, in addition to the previously available full-frame lens options of DL 24/35/50 mm F2.8. All five lenses are designed specifically for aerial cinematography and have lightweight monocoque carbon fiber housings, with the lightest lens weighing just 178 g. This ensures the ultra-high maneuverability for the Inspire 3.


    DJI RC Plus

    The DJI Inspire 3 is paired with the DJI RC Plus, a remote controller of professional caliber that boasts a built-in 7-inch 1,200-nit high-bright screen. This provides an exceptional outdoor monitoring experience. The controller also has an HDMI out port and is equipped with several buttons and dials on the front, back, and top, enabling swift and intuitive operation. The button functions are customizable to suit the user's preference, delivering an even smoother operating experience.
    DJI RC Plus
    Professional accessories such as a strap and waist support are also included for more comfortable and efficient long-duration use.

    RECENTLY VIEWED PRODUCTS

    BACK TO TOP